Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Evergreen, CA
Gate installation in Evergreen means working with hillside driveways, HOA design standards, and gates that have to hold up to real elevation change, not just look good from the street. Most homes here were built between the 1970s and 1990s, with stucco walls and decorative iron or wood gates that are now 30 to 50 years old and showing it. Gate Repair Almaden has served Evergreen since 2018, and we do the full lifecycle: install, repair, and replace, with electric and automated systems covered from operator to keypad. Call (833) 620-6313 if a gate is failing or you’re planning a new one.
Why Evergreen Homes Are Different
Evergreen (95148) sits against the East San Jose foothills, and that changes how gates wear, fail, and get fixed. The hot, dry summers pull moisture out of wood gates until they shrink and warp, loosening hinge bolts and pulling latch plates out of alignment. Then winter rain arrives, wood swells, and exposed steel hardware starts corroding. That seasonal swing means two distinct waves of repair calls every year, and it’s the main reason a gate that worked fine in February can be jammed by July.
The terrain matters just as much. Evergreen’s hillside lots mean a lot of driveway gates mounted on slopes, with cantilever and slide gates carrying more weight than a flatland gate ever would. The first hot week of summer is when we get calls about gates hanging low and dragging, because dry soil lets posts shift out of plumb and track mounts loosen. Many of these homes are part of HOA-governed planned developments, so repairs often need to match a community-wide style, not just the homeowner’s preference. That’s a normal part of the job here, and we’re used to working within those requirements.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Evergreen Services
The two calls we get most from Evergreen homeowners are a gate that won’t swing or slide, and an electric gate that won’t open on command. Both live on this page, each with its own dedicated Evergreen resource.
Gate Repair in Evergreen
Mechanical gate repair here is shaped by the hills: sagging slide gates, binding hinges on warped wood, posts that have been knocked out of plumb by shifting hillside soil. We straighten, reinforce, and re-hang gates on the hardware that’s actually right for the weight and slope, and we carry the parts to do most jobs in one visit. If your gate is dragging, sticking, or leaning, see the full breakdown at Gate Repair in Evergreen.
Electric Gate Repair in Evergreen
Automated gates add a control board, an operator arm or slide motor, keypads, intercoms, and photo-eye safety sensors – and any one of those can take the whole system down. We diagnose the entire electric stack, not just the motor, and we’re factory-familiar with the brands most common on Evergreen properties, so parts and programming match your exact model. For a deeper walkthrough of operator repair, safety-edge issues, and keypad faults, visit Electric Gate Repair in Evergreen.
Gate Installation in Evergreen
A new gate in Evergreen has to do three things at once: hold up on a slope, match the look the HOA expects, and operate smoothly through decades of seasonal movement. Most gates we replace in 95148 are failing because they were installed with hardware that was never really rated for a hillside driveway, or the gate style itself doesn’t suit the terrain. We help homeowners decide when to rebuild and when to replace, then install the right gate for the lot. For the full scope of what we build, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every day, or you’ve never had powered access and want the security and convenience of opening from the car or the house.
What it costs in Evergreen
Automatic gate installation in Evergreen runs roughly $1,800 to $6,300 depending on the operator brand, gate weight, and whether we’re running new power to the gate location.
How we do it
We mount the operator to match your gate’s swing or slide geometry, set travel limits, install safety photo eyes, and program keypads and remotes to work before we leave.
Driveway Gate Installation
Signs you need it
The existing gate has structural damage, rust at the joints, or it’s too light for the slope and wind it faces, and it’s no longer worth patching year after year.
What it costs in Evergreen
A new driveway gate in Evergreen typically runs $1,500 to $5,000 for the fabricated gate itself, with installation labor and hardware added based on the site.
How we do it
We measure the actual opening and slope, order or fabricate the gate to those dimensions, then hang it on posts rated for the weight, wind load, and hillside soil conditions.
Sliding Gate Installation
Signs you need it
Your lot slopes across the driveway rather than along it, so a swing gate would either strike the ground or need to fight gravity every time it opens.
What it costs in Evergreen
Sliding gate installations in Evergreen generally fall between $1,500 and $5,000 for the gate, with track, rollers, and operator adding cost based on gate length and weight.
How we do it
We set the track and support posts level against the slope, hang the gate on heavy-duty rollers, and test the full travel repeatedly under load before calling it done.
What Gate Installation Costs in Evergreen
| Item | Typical range in Evergreen |
|---|---|
| Swing or slide gate (fabricated, base model) | $1,500 – $5,000 |
| Automatic gate operator and controls | $1,800 – $6,300 |
| Full automatic gate system, installed | $2,500 – $15,000 |
Every installation quote is given up front and agreed before any work starts, so the number we show you is the number the job costs. Hillside work in Evergreen can push pricing higher when posts need deeper footings, longer wire runs, or reinforced mounts to handle the slope.
Can Gate Installation handle the electrical work and permits?
We handle the low-voltage and line-voltage electrical runs required for automatic gate operators, including conduit and connections, and we build to the permitting and HOA requirements common in Evergreen’s planned communities. You don’t need to pull a separate electrician onto the job.
Do you install gates on steep Evergreen driveways?
Yes, and that’s some of the most common work we do in 95148. Steep driveways usually call for slide gates or cantilever designs that don’t swing across a slope, and we spec the posts, track, and operator to handle the grade.
Brands We Service in Evergreen
We’re factory-familiar with DoorKing, Elite, Mighty Mule, and LiftMaster, plus the rest of the major gate-operator brands you’ll find across Evergreen. That means we diagnose the system you actually have, source the right part for that exact model, and handle most common faults in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Evergreen, CA
| Service | Typical range in Evergreen |
|---|---|
| Hinge replacement (pair) | $120 – $300 |
| Weld repair on iron gate | $150 – $400 |
| Gate post reset on hillside soil | $200 – $600 |
| Track or roller replacement | $150 – $500 |
| Swing or slide gate (fabricated) | $1,500 – $5,000 |
| Operator motor replacement | $400 – $1,200 |
| Safety sensor or photo eye replacement | $150 – $400 |
| Automatic gate system, installed | $2,500 – $15,000 |
Prices in Evergreen push higher when we’re working on a steep driveway that needs deeper post footings or longer wire runs, and when HOA requirements call for a specific gate style or finish. Every quote is written down, explained, and agreed before the first cut is made.
Neighborhoods We Serve in Evergreen
We work across all of Evergreen’s 95148 area, from the valley-floor planned communities up into the hillside developments where most of the heavy slide-gate work happens. Typical response for repair calls in Evergreen is same-day or next-day, depending on the season and where you are in the hills.
- The Ranch
- Evergreen Meadows
- Silver Creek Valley
- Montgomery Hills
- Bellingham Square
Service Area – Cities Near Evergreen
Gate Repair Almaden works throughout the East San Jose foothills and the surrounding South Bay neighborhoods. If you’re just outside Evergreen, we also serve East San Jose, CA, Silver Creek Country Club, CA, Central San Jose, CA, and Spartan Keyes, CA.
Serving Evergreen, CA – Our Local Coverage Area
We’re based in the Evergreen area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Evergreen
Yes, regularly. Many Evergreen communities have shared fencing and coordinated gate styles, so we work directly with HOA boards and property managers to make sure materials, colors, and hardware match the community’s standards before any work starts. We’re comfortable handling the approval process.
Most repair calls in 95148 are scheduled same-day or next-day. Hillside homes in the upper neighborhoods can sometimes add a little drive time, but we dispatch from a gate-only shop and we’re not bouncing between unrelated trades, so we get to Evergreen quickly.
We’re based in Almaden but we work throughout East San Jose, including all of Evergreen’s 95148 ZIP code, on a regular basis. You’re getting the same specialist crew, the same brand-specific parts knowledge, and the same upfront pricing whether we’re crossing over from Almaden or five minutes away.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Evergreen Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Nicole Miller"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Mark Bennett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Sarah Sutton